| INPUT VOLTAGE RANGE: |
+- 50 Volts (input attenuation), +- 14 Volts (unattenuated) |
| INPUT RESISTANCE: |
20 Kilo-ohms (D.C. coupled) |
| NOISE (referred to
input, wideband): |
| x1 Gain |
<= 187.5 microvolts rms |
|
| x10 Gain |
<= 25 microvolts rms |
|
| x100 Gain |
<= 20 microvolts rms |
|
|
| SIGNAL TO NOISE RATIO : |
>110 decibels |
| GAIN: |
continuously variable over three ranges : 0-1, 0-10, 1-100
(+- 3%) |
| D.C. OUTPUT OFFSET: |
continuously variable (switched in) : +-14 Volts |
| LOW FREQUENCY CUTOFF IN A.C. MODE: |
1.8 Hertz |
| FREQUENCY RESPONSE (+/- 10 Volts
out): |
D.C. to 50 kHz +-3% |
| OUTPUT HIGH FREQUENCY CUTOFFS (Hz
+/- 5%): |
10, 25, 50, 100, 250, 500, 1000, 2500, 5000,
10000, 20000, OUT |
| OUTPUT LOW FREQUENCY
CUTOFFS (Hz +/- 5%): |
OUT, 0.1, 0.5, 1, 2.5, 5, 10, 25, 50, 100, 250,
500 |
| ATTENUATION BEYOND
CUTOFFS: |
12 dB per octave; 40 dB per decade Active Butterworth
Filters |
| OUTPUT VOLTAGE RANGE: |
+- 14 Volts (typical) |
| OUTPUT IMPEDANCE: |
Approximately 50 ohms |
| OUTPUT SIGNAL POLARITY: |
switchable, inverting or non-inverting |
| INPUT CONNECTOR: |
Panel mounted BNC female connector |
| OUTPUT CONNECTOR: |
Panel mounted BNC female connector |
| POWER SUPPLY: |
85-265 VAC 50-60 Hz, auto-switching |
| FUSE: |
1 Amp quick blow |
| DIMENSIONS: |
5.25" x 19" x 12" (13.3mm x 48.3mm x 30.5mm) |
| WEIGHT: |
Approx. 15lbs (6.5kg) |
| WARRANTY: |
5 years |
Home
