Home   News     Privacy Statement    Sitemap    Sales and Events
     Home
     About Us
     Catalog
     Contact Us
     Myoguide

Model 2015F - Four Channel Non-Isolated Amplifier with Signal Conditioning 

$4230.00 U.S. Dollars

Specifications
 
INPUT RESISTANCE: 100 GigaOhms
MAXIMUM ELECTRODE IMPEDANCE: 300 MegaOhms
EQUIVALENT INPUT NOISE (wideband): X1000 Gain <5 microvolts rms;  X5000 Gain <2.5 microvolts rms; X10000 Gain <2.5 microvolts rms
CMMR: 60 Hz >90dB; 120Hz >85dB
SIGNAL TO NOISE RATIO:  >110dB
GAIN: continuously variable over three ranges (+/-5%) : 0-1000, 0-5000, 1-10000
D.C. OUTPUT OFFSET: continuously variable (switched in) : +-14 Volts
LOW FREQUENCY CUTOFF IN A.C. MODE:  0.5 Hertz
FREQUENCY RESPONSE (+/- 10 Volts out): D.C. to 10 kHz +/-5%
OUTPUT HIGH FREQUENCY CUTOFFS (Hz +/-5%): 100, 250, 500, 1000, 2500, 5000, OUT
OUTPUT LOW FREQUENCY CUTOFFS (Hz +/-5%): OUT, 0.5, 2, 20, 100, 200
ATTENUATION BEYOND CUTOFFS:  12 dB per octave; 40 dB per decade Active Butterworth Filters
OUTPUT VOLTAGE (maximum): +- 14 Volts/channel
OUTPUT IMPEDANCE: Approximately 50 ohms
OUTPUT RESISTANCE: 50 Ohms/channel
POWER SUPPLY: 85-265 VAC 50-60 Hz, auto-switching
FUSE:  1 Amp quick blow
ENCLOSURE: Flame retardant ABS, UL flammability rating 94V-O
DIMENSIONS: 11" x 7.75" x 3" (280mm x 200mm x 75mm)
WEIGHT: Approx. 3lbs (1.4 kg)
WARRANTY: 5 years
NOTE: This device is not isolated. All non-isolated amplifiers are not intended for use with human subjects. For human subjects, please select an ISOLATED AMPLIFIER such as Model 2024F.

 

All specifications are subject to change without notice

 
Copyright 2008 [Intronix Technologies Corporation]. All rights reserved